The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT rear spud. A standard elongated toilet seat (supplied by others) can be used with this product.

These fixtures are designed to be installed onto a 3 bolt blow out jet wall carrier.
Front mounted

Item number

cUPC approval yes
Product name HDWC2414-FM-R

Product properties

gross weight 10.00 kg
net weight 0.00 kg
Overall front to back 24 1/8''
Overall height 15''
Overall left to right 14''
type of mounting front mounted
inlet size G 1 1/4 B
minimum flushing capacity 6.00 liter
type of WC wall hung

Additional product information

Product Pictures
ZPO_001_2000101936-HDWC2414-FM-R_nd1000-1x1.png PNG (977 KB)
Perspective Drawing
ZDL_001_2000101936-HDWC2414-FM-R_#SALL_high.png PNG (301 KB)
Technical Drawing Marketing
ZTE_001_2000101936-HDWC2414-FM-R_#SALL_high.png PNG (301 KB)
Mounting Instruction
ZMI_001_2000101931-HDWC2414-FM-R-HDWC2514-FM-T_Install_#SALL_#AQU_#V1.pdf PDF (596 KB)
ZMI_001_2000101936-HDWC2414-FM-R_#SALL_#AQU_#V2.pdf PDF (596 KB)

Related products