Healthcare - Retrofit Ozo-flo faucet, straight wall mount
Ozo-flo clinical hand wash faucet. Ideal for new or retrofit applications where existing hand wash sinks can benefit from ozone technology. The addition of ozone and other mixed oxidants will help improve hand hygiene and helps to keep the sink and waste free of biofilms and bacteria.
Faucets are fabricated of type 316 stainless steel and feature a blue illumination ring indicating activation of ozonation cycle. The Ozo-flo faucet is available in a choice of 3 styles; straight, angled or curved. The body of the faucet is polished to a high lustre and there is a choice of either deck or wall mounting. 5 litre/1.32 US gallon per minute laminar flow rate. Certified to ASME A112.18.1-2012/CSA B125.1-12 standards.
Control features include; a post-wash cycle of 3 seconds washes soap residue and bacteria down the sink. A daily purge cycle prevents water from stagnating in the drain lines and traps, ensuring continuous waste disinfection. Recommended for areas with normal water conductivity in range of 75 - 350 TDS. If unaware of your local water conductivity, please contact customer service to calculate this for you.
Ozo-flo has been exclusively designed for sinks intended for hand washing only. It is not recommended as a drinking source.
Wall mounted housing conceals the ozone generator, electronic controls and plumbing connections. In the event of a power failure, our recommended battery backup component (AT00-024) will ensure the faucet will still dispense water – excluding the ozonation - until power is restored.
An optional handheld programmer (AC01-005) enables hand-hygiene data logging and parameter adjustments such as sensor range and ozone run times. A plug-in transformer required for generation of mixed oxidants is included. Recommended water temperature is between 27-35°C. Our pre-set thermostatic mixing valve is also available as part number MEDI-MIX.
Certifications: UL 1951, 2nd Edition, UL Standard for Safety Electric Plumbing Accessories. UL 979, 2nd Edition, Standard for Water Treatment Appliances. ASME A112.18.1-2018/CSA B125.1-18, Plumbing Supply Fittings.
HWF05, wall-mount, straight faucet