Antimicrobial hand hygiene sink with integral shroud. 18 gauge (1.2mm) type 304 stainless steel. Right rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings to conform to national healthcare standards. High back and side walls contain splashing and protect adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled, splash mounted faucet. Due to the strength and lightness of stainless steel, an in-wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection which is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. The use of sharp utensils or heavy equipment can chip and mar the treated surface rendering Saniguard ineffectual; thereby voiding the warranty. Patent Pending / Industrial Design Registration Pending
HWSS1518P-00 - no hole HWSS1518P-00/1 - 1 hole ∅1 1/8" (29mm) 9" (228mm) from top of basin.