Antimicrobial Hand Hygiene Sink. 18 gauge, type 304 stainless steel. Left rear waste location prevents water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings to comply to national healthcare guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. This hand hygiene sink is wider to permit forearm washing for light procedures as well as for mounting of paper towel and soap dispensers within the splash guard. Due to the large size of the backsplash, an additional rear wall splash guard is not required.Recommended for laminar flow, user temperature controlled deck mounted faucet.
Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANIGUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending
HWS1420P-00/1, 1 hole, 1 1/2" diameter on ledge, for deckmount faucet,
HWS1420P-00/3, 3 hole, 1 1/2" diameter, 4" center spread on ledge, for deckmount faucet,
HWS1420P-00, Custom, non-returnable
19 3/16 x 21" Overall. 14 x 20 x 10" Bowl. (FB x LR x D).
487 x 533 mm Overall. 356 x 508 x 254 mm Bowl. (FB x LR x D).