F5E-Mix electronic pillar mixer with plug-in power supply unit for hot water heaters

F5E-Mix pillar mixer DN 15 for sanitary facilities, opto-electronically controlled. For connection via hoses to open low-level domestic hot water heaters. Control electronics, solenoid valve cartridge and sensor in all-metal housing, high-polished chromium-plated brass. Temperature lever with adjustable, turn-proof temperature stop as well as conversion set for concealed mixing device. With jet controller. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control. With 100 - 240 V AC plug-in power supply unit.

Item number

SAP#
2030035332
Product name
F5EM1006

Product properties

Type of mounting
Tap hole
Type of operation
Sensor operation
Protective system IP
59K
Power supply connection
100-240VAC
Article group
F5EM1006
Diameter nominal
DN 15
Calculation flow rate cold water
0.08 liter per second
Functional principle
Electronic self-closing
Minimum flow pressure
1.00 bar
Power consumption
1.50000
Volume flow rate at 3 bar
0.08 liter per second
Inlet size
G3-8
Type of mixing
With mixing
Material fitting
Brass
Sound insulation
No
Spout projection
125.00 mm
Surface finish fitting
Chromed
Type of tap
Pillar tap
Depressurised
Yes
Thermal disinfection
No
Protective shutdown
Yes
Default automatic hygiene flushing
24h after the last activity
Position of power connection
From bottom
Type of sensor
Opto-electronic sensor

Additional product information


Optional accessories

Spare Parts

Show all related products

Related Products

F3E Electronic in-wall tap for separate power supply
F3EV1017 ++

F3E Electronic in-wall tap for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F3E Electronic in-wall tap for separate power supply
F3EV1017 ++

F3E Electronic in-wall tap for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer for separate power supply
F3EM1005 ++

F3E-Mix electronic pillar mixer for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F5E-Mix electronic pillar mixer for separate power supply
F5EM1004 ++

F5E-Mix electronic pillar mixer for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer with in-wall power supply
F3EM1003 ++

F3E-Mix electronic pillar mixer with in-wall power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E Electronic in-wall tap for separate power supply
F3EV1017 ++

F3E Electronic in-wall tap for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F5E-Mix electronic pillar mixer with in-wall power supply
F5EM1003 ++

F5E-Mix electronic pillar mixer with in-wall power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E Electronic in-wall tap for separate power supply
F3EV1017 ++

F3E Electronic in-wall tap for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
Electronic tap components
AQUA121

Electronic tap components

Type of operation:
Sensor operation 
Type of mounting:
Concealed mounting 
Type of sensor:
Capacitive-electronic sensor 
2030048572 / PWC3O0002

Electronic fitting components

Type of operation:
Sensor operation 
Type of mounting:
Concealed mounting 
Type of sensor:
Capacitive-electronic sensor 
F5E-Mix electronic pillar mixer with plug-in power supply unit
F5EM1002 ++

F5E-Mix electronic pillar mixer with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix Electronic in-wall mixer for separate power supply
F3EM1017 ++

F3E-Mix Electronic in-wall mixer for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor