F3E Electronic in-wall tap for separate power supply

F3E washbasin tap DN 15 as finished installation kit for in-wall installation in basic installation kit, for sanitary facilities. Opto-electronically controlled, for connection to pre-mixed hot water or cold water. With solenoid valve, holding frame with profile seal, stainless steel cover plate 190 x 245 mm with covered screw fixing including sensor with control electronics and strainer. Visible parts made of high-polished chromium-plated brass. Spout with aerator with integrated flow regulator 3.0 l/min. Projection 200 mm, depth adjustability 25 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control. Separate power supply via power supply unit 6.75 V / 12 V DC.

Download Factsheet

Add to favourites

Compare products

Product properties

Type of mounting	In-wall installation with box
Type of operation	Sensor operation
Power supply connection	6-12-VDC
Diameter nominal	DN 15
Calculation flow rate cold water	0.10 liter per second
Functional principle	Electronic self-closing
Minimum flow pressure	1.00 bar
Volume flow rate at 3 bar	0.05 liter per second
Inlet size	G-3-4-B
Type of mixing	No mixing
Material casing	Stainless steel
Material fitting	Brass
Sound insulation	No
Spout projection	200.00 mm
Surface finish casing	Satin finished
Surface finish fitting	Chromed
Type of tap	In-wall tap
Depressurised	No
Thermal disinfection	No
Protective shutdown	Yes
Default automatic hygiene flushing	24h after the last activity
Position of power connection	Top
Type of sensor	Opto-electronic sensor