F5E-Therm electronic thermostatic in-wall mixer with battery operation

F5E-Therm thermostatic mixer DN 15 as finished installation kit for in-wall installation in basic installation kit, for sanitary facilities. Opto-electronically controlled, for connection to hot water and cold water. Function block with integrated solenoid valve cartridge, thermostat and device for optional bypass solenoid valve cartridge, for program-controlled thermal disinfection. Thermostat with metal handle with adjustable and turn-proof temperature stop and option for manual thermal disinfection. Visible parts made of high-polished chromium-plated brass. With 6 V lithium battery (CR-P2), holding frame with profile seal, stainless steel cover plate 190 x 245 mm with covered screw fixing including sensor with control electronics, rosette, backflow preventer and strainers. Spout with laminar jet controller with integrated flow regulator 6.0 l/min. Projection 140 mm, depth adjustability 25 mm. Activated water hygiene flushing 24 hours after last activation, safety switch-off with continuous reflection and saving of statistical data. With option for parameterization and communication via optional, bidirectional remote control.

Item number

SAP# 2030029015
Product name F5ET1010

Product properties

Type of mounting In-wall installation with box
Type of operation Sensor operation
Power supply connection Battery 6-V
Diameter nominal DN 15
Calculation flow rate cold water 0.07 liter per second
Calculation flow rate hot water 0.07 liter per second
Functional principle Electronic self-closing
Minimum flow pressure 1.00 bar
Volume flow rate at 3 bar 0.10 liter per second
Inlet size G-3-4-B
Type of mixing Thermostat
Material casing Stainless steel
Material fitting Brass
Sound insulation No
Spout projection 140.00 mm
Surface finish casing Satin finished
Surface finish fitting Chromed
Type of tap In-wall tap
Depressurised No
Thermal disinfection Prepared for automatic thermal disinfection
Protective shutdown Yes
Volume flow rate bypass 0.05 liter per seconds
Default automatic hygiene flushing 24h after the last activity
Type of sensor Opto-electronic sensor

Additional product information


Mandatory accessories

R5 Franke system box for in-wall mixers
R5 Franke system box for in-wall mixers F5BX1001 ++

R5 Franke system box for in-wall mixers

Type:
Built in box flange 
Type of mounting:
In-wall installation with box 
Show all related products

Optional accessories

Spare Parts

Related Products

F3E Electronic in-wall tap for separate power supply
F3E Electronic in-wall tap for separate power supply F3EV1017++

F3E Electronic in-wall tap for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F5E electronic pillar tap with battery operation
F5E electronic pillar tap with battery operation F5EV1001 ++

F5E electronic pillar tap with battery operation

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic in-wall mixer with battery operation
F3E-Mix electronic in-wall mixer with battery operation F3EM1011 ++

F3E-Mix electronic in-wall mixer with battery operation

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F5E-Therm electronic thermostatic wall-mounted mixer with battery operation
F5E-Therm electronic thermostatic wall-mounted mixer with battery operation F5ET1002 ++

F5E-Therm electronic thermostatic wall-mounted mixer with battery operation

Type of operation:
Sensor operation 
Type of mounting:
Wall mounting 
Type of sensor:
Opto-electronic sensor 
F5E electronic pillar tap with plug-in power supply unit
F5E electronic pillar tap with plug-in power supply unit F5EV1002 ++

F5E electronic pillar tap with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer with plug-in power supply unit
F3E-Mix electronic pillar mixer with plug-in power supply unit F3EM1002 ++

F3E-Mix electronic pillar mixer with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
PROTRONIC - A3000 open Electronic installation mixer
PROTRONIC - A3000 open Electronic installation mixer AQUA107

PROTRONIC - A3000 open Electronic installation mixer

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F3E electronic bib tap with battery operation
F3E electronic bib tap with battery operation F3EV1004 ++

F3E electronic bib tap with battery operation

Type of operation:
Sensor operation 
Type of mounting:
Wall mounting 
Type of sensor:
Opto-electronic sensor 
F5E-Therm electronic thermostatic in-wall mixer with battery operation
F5E-Therm electronic thermostatic in-wall mixer with battery operation F5ET1011 ++

F5E-Therm electronic thermostatic in-wall mixer with battery operation

Type of operation:
Sensor operation 
Type of mounting:
In-wall installation with box 
Type of sensor:
Opto-electronic sensor 
F3E-Mix electronic pillar mixer with battery compartment
F3E-Mix electronic pillar mixer with battery compartment F3EM1001 ++

F3E-Mix electronic pillar mixer with battery compartment

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F5E-Mix electronic pillar mixer for separate power supply
F5E-Mix electronic pillar mixer for separate power supply F5EM1004 ++

F5E-Mix electronic pillar mixer for separate power supply

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor 
F5E-Mix electronic pillar mixer with plug-in power supply unit
F5E-Mix electronic pillar mixer with plug-in power supply unit F5EM1002 ++

F5E-Mix electronic pillar mixer with plug-in power supply unit

Type of operation:
Sensor operation 
Type of mounting:
Tap hole 
Type of sensor:
Opto-electronic sensor