A DUH hospital disposal unit manufactured from 1.2 mm thick, grade 1.4301 (304) stainless steel with a satin polish finish. The top is turned down on all four edges and incorporates a wet area recess. Fitted with a sluice hopper at one end and has a back inlet for duct mounted cisterns. The hopper has a 110 mm dia. outlet which can accept a P or S trap, available as an extra. Stainless steel cisterns are available with stainless steel downpipes for duct mounting installations. For installations where the cistern is duct mounted a plastic whereas the stainless steel cistern can be 6, 7 or 9 litre capacity and all are fitted with 13 mm HP brass valve, plastic float and CP metal flushing lever handles. The unit should only be fed from a cistern or tank water supply. Unit can be mounted on either stainless steel cantilever brackets or stainless steel front leg supports. Front leg supports give a working height of 900 mm and have adjustable feet which can be screwed to the floor for extrast ability. L or R after the code number refers to the handing of the drainer ie. left or right when facing front of unit. HTM Standard 64. LH drainer
