Security Basin: HDWSS2021-FM

This Heavy Duty Wall Service Sink is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm), type 304 (CNS 18/10) stainless steel. It is seamlessly welded and polished to a #4 satin finish. Standard waste is a 2" Removable P-Trap. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
INSTALLATION: These fixtures are designed to be installed onto finished walls which are not accessible from a pipe chase. Installation is achieved by means of a wall hanger bracket and lower mounting holes. Mounting hardware and plumbing are all self contained and only accessed by a removable panel. The panel is secured with tamper resistant screws.
AVAILABLE CONTROLS: The basin is controlled with an air-operated self closing valve with a non-hold open feature. Flow time is adjustable from approximately 5 to 60 seconds and has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal resistant push button which requires less than 5lbs to operate. The valve can be mounted up to 10 feet (3meters) away from the push button. Valve conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05. front mounted.
Product options:
HDWSS2021-FM-SV - Single temperature basin valve
HDWSS2021-FM-DV - Dual temperature basin valve

Technical data

Security Basin: HDWSS2021-FM

back splash height12''
bowl depth10''
Bowl finishsatin finished
Bowl front to back16''
Bowl left to right19''
drinking bubblerno
Access panelyes
gross weight0.00 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade14 gauge (2.0 mm)
Overall front to back20''
overall height30''
Overall left to right21''
overflowno
soap dishno
back splashyes
type of mountingfront mounted
type of waste kitplain outlet
undercoatedno
waste sizeDN 50
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)