Security Basin: HDFSS2021-FM

This heavy duty floor service sink is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm), type 304 (CNS 18/10) stainless steel. It is seamlessly welded and polished to a #4 satin finish. Standard waste is a 2 3/8" OD Plain End Elbow.  Certified to ASME A112.19.3-2008 / CSA B45.4-08.
INSTALLATION: These fixtures are designed to be installed onto finished walls which are not serviceable from a pipe chase. Installation is achieved by means of a wall hanger bracket and lower mounting holes. All fasteners are concealed with tamper proof screws.
AVAILABLE CONTROLS:  The basin is controlled with an air-operated self closing valve with a non-hold open feature. Flow time is adjustable from approximately 5 to 60 seconds which has a flow rate of 2.2 gpm (8.3 lpm). The valve is operated by a vandal resistant push button which requires less than 5lbs to operate. Valve conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05. See basin valve options for available configurations. front mounted.
Product options:
HDFSS2021-FM-SV - Single temperature basin valve
HDFSS2021-FM-DV - Dual temperature basin valve

Technical data

Security Basin: HDFSS2021-FM

back splash height12''
bowl depth10''
Bowl finishsatin finished
Bowl front to back16''
Bowl left to right19''
drinking bubblerno
Access panelyes
gross weight0.00 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade14 gauge (2.0 mm)
Overall front to back20''
overall height40''
Overall left to right21''
overflowno
soap dishno
back splashyes
type of mountingfront mounted
type of waste kitplain outlet
undercoatedno
waste sizeDN 50
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)