Drinking Fountain: KEM8CR-STN

Split level stainless steel bowl fountain chilled . Heavy duty galvanized steel wall mounting frame with brushed stainless panels. Waterways are lead-free in materials & construction. Built-in 100 micron strainer stops particles before they enter the waterway. Tamper proof flexible bubbler. Mechanical push button. Unit will comply with wheelchair accessibility when properly installed. Installation instructions included.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller. Optional filter kit 033926-002.

Technical data

Drinking Fountain: KEM8CR-STN

compressor power0.25 hp
chiller capacity30.40 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.80 ampere
gross weight0.00 kg
inlet diameterDN 10
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
outlet sizeDN 32
Overall front to back18 1/4''
overall height40 3/4''
Overall left to right39 1/2''
total power550.00 watt
type of mountingwall mounting
water temperature10.00 degree celcius
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes

List of related parts (sorted by type of relation)

spare part

035607-108, Spare part - drinking fountains READ ALL

accessory

F037116-101 Galaxi® replacement cartridge READ ALL

consumable

033879-001 READ ALL