Chilled Drinking Fountain: KEP8AC-SBF-SND

Combination chilled drinking fountain with sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Drinking fountain is mechanically activated. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual fountain activation using anti-microbial push pads.

Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. 
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 

8 gph chiller, sandstone finish. Optional filter kit 033926-001.

Technical data

Chilled Drinking Fountain: KEP8AC-SBF-SND

input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
gross weight0.00 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
outlet sizeDN 32
Overall front to back18 9/16''
overall height37 13/16''
Overall left to right18 7/16''
total power500.00 watt
type of mountingwall mounting
water temperature10.00 degree celcius
full load amps4.40 ampere
waste sizeDN 32
chiller capacity30.40 liter per hour
motor power500.00 watt
type of operationmanual operation
compressor power0.25 hp
surface finishsatin finished
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes

List of related parts (sorted by type of relation)


F037116-101 Filter Element READ ALL


033879-001 READ ALL