Chilled Drinking Fountain: KEPV8AC-EBF-STN

Combination chilled drinking fountain with sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Drinking fountain is mechanically activated. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). Easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, stainless steel cabinet, vandal resistant push buttons, sensor activated sports bottle filler with bottle counter. Optional filter kit 033926-001.

Technical data

Chilled Drinking Fountain: KEPV8AC-EBF-STN

compressor power0.25 hp
chiller capacity30.00 liter per hour
drinking bubbleryes
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.40 ampere
glass filleryes
gross weight33.00 kg
inlet sizeDN 10
materialstainless steel
motor power500.00 watt
Overall front to back18 9/16''
overall height37 13/16''
Overall left to right17 5/8''
type of mountingwall mounting
waste sizeDN 32
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes