Hand Hygiene Sink: HWS1414P-00

Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2 mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination.  
Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANIGUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending

Technical data

Hand Hygiene Sink: HWS1414P-00

back splash height8''
bowl depth10''
Bowl finishsatin finished
Bowl front to back14''
Bowl left to right14''
gross weight18.84 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade18 gauge (1.2 mm)
Overall front to back18 11/16''
overall height18 1/2''
Overall left to right15''
overflowno
back splashyes
surface treatmentSaniguard
type of waste kitintegral tailpiece
undercoatedno
waste hole positionrear left
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)