Drop In Sink: LBD6410/316PCB-1

Double compartment self rimming drop-in sink with faucet ledge. Center back waste location.  18 gauge (1.2mm), type 316 (EN1.4401 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners, and waste kit. Certified to ASME A112.19.3-2008 / CSA B45.4-08. 

center back waste location, includes 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.


Model options

LBD6410/316PCB-1/1, 1 hole, 1 1/2" diameter, centered over partition
LBD6410/316PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter, centered over partition
LBD6410/316PCB-1/X, Custom (non-returnable)

Technical data

Drop In Sink: LBD6410/316PCB-1

type of basinDouble Compartment
bowl depth10''
bowl finishsatin finished
Bowl front to back16''
Bowl left to right14''
gross weight11.58 kg
materialstainless steel
material code1.4404 Chrome-Nickel-Molybdenum steel V4A
Overall front to back20 13/16''
Overall left to right31 1/4''
overflowno
spillwayyes
number of faucet holes0
tap hole diameter1 1/2''
tap ledgeyes
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre back
net weight9.31 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)