Drop In Sink: ALHS8606P-1

Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible (Canada only), center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece

Model options

ALHS8606P-1/2L, 1 hole, bubbler hole left ledge
ALHS8606P-1/2R, 1 hole, bubbler hole left ledge
ALHS8606P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge
ALHS8606P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge
ALHS8606P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge
ALHS8606P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge

Technical data

Drop In Sink: ALHS8606P-1

type of basinClassroom
bowl depth6''
bowl finishsatin finished
Bowl front to back18''
Bowl left to right16''
gross weight6.09 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back20 1/8''
Overall left to right23 1/2''
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
waste hole positioncentre
net weight4.28 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)