Drop In Sink: ALBLS4605P-1

Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece


Model options

ALBLS4605P-1/2, 1 hole, bubbler on left ledge
ALBLS4605P-1/4, 3 hole, 8" centerset, bubbler on left ledge

Technical data

Drop In Sink: ALBLS4605P-1

type of basinClassroom
bowl depth5''
bowl finishsatin finished
Bowl front to back14''
Bowl left to right16''
gross weight5.24 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back18 13/16''
Overall left to right20 13/16''
overflowno
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight3.42 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)