Toilet: HDWC2414-FM-R

The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT rear spud.

These fixtures are designed to be installed onto a 3 bolt blow out jet wall carrier.

front mounted

Technical data

Toilet: HDWC2414-FM-R

inlet sizeG 1 1/4 B
materialstainless steel
material thickness1/16''
minimum flushing capacity6.00 liter
Overall front to back24 1/8''
overall height15''
Overall left to right14''
surface finishsatin finished
type of mountingfront mounted
type of WCwall hung
gross weight10.00 kg
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)