Drop In Sink: ALHS8605P-1

Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece


Model options

ALHS8605P-1/2L, 1 hole, bubbler hole left ledge
ALHS8605P-1/2R, 1 hole, bubbler hole right ledge
ALHS8605P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge
ALHS8605P-1/2DR, Diagonal punching, 1 hole, bubbler hole right ledge
ALHS8605P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge
ALHS8605P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole right ledge

Technical data

Drop In Sink: ALHS8605P-1

type of basinClassroom
bowl depth5''
bowl finishsatin finished
Bowl front to back18''
Bowl left to right16''
gross weight5.88 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back20 1/8''
Overall left to right23 1/2''
overflowno
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight4.06 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)