Drop In Sink: ALBLRS7005P-1

Single compartment self rimming drop-in sink with triple ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

Center back waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece

Model options

ALBLRS7005P-1/3L, 2 single holes, bubbler hole left ledge
ALBLRS7005P-1/3R, 2 single holes, bubbler hole right ledge
ALBLRS7005P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge
ALBLRS7005P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge

Technical data

Drop In Sink: ALBLRS7005P-1

type of basinSingle Compartment
bowl depth5''
bowl finishsatin finished
Bowl front to back17''
Bowl left to right20''
gross weight6.77 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back21 13/16''
Overall left to right27 1/2''
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
waste hole positioncentre back
net weight4.96 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)