Drop In Sink: LBD6408/316P-1

Double compartment self rimming drop-in sink with faucet ledge. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners and 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08. 

8" (203mm) deep, centre back waste location, 3 1/2" (89mm) type 316 crumb cup waste


Model options

LBD6408/316P-1/1, 1 hole, 1 1/2" diameter
LBD6408/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset
LBD6408/316P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
LBD6408/316P-1, Custom (non-returnable)

Technical data

Drop In Sink: LBD6408/316P-1

type of basinDouble Compartment
bowl depth8''
bowl finishsatin finished
Bowl front to back16''
Bowl left to right14''
gross weight10.31 kg
materialstainless steel
material code1.4404 Chrome-Nickel-Molybdenum steel V4A
Overall front to back20 1/2''
Overall left to right31 1/4''
overflowno
spillwayyes
number of faucet holes0
tap hole diameter1 1/2''
tap ledgeyes
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre back
net weight8.49 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)