Drop In Sink: ALBD7506P-1

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.

Center back waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece, with spillway


Model options

ALBD7506P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset
ALBD7506P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
ALBD7506P-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBD7506P-1

type of basinDouble Compartment
bowl depth6''
bowl finishsatin finished
Bowl front to back17''
Bowl left to right15''
gross weight9.77 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back22''
Overall left to right33 1/4''
overflowno
spillwayyes
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre back
net weight7.05 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)