Drop In Sink: ALBD1306P-1

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.

Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece

Model options

ALBD1306P-1/1, 1 hole, 1 1/2" diameter
ALBD1306P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset
ALBD1306P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
ALBD1306P-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBD1306P-1

type of basinDouble Compartment
bowl depth6''
bowl finishsatin finished
Bowl front to back11''
Bowl left to right13''
gross weight7.47 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back15 13/16''
Overall left to right29 1/4''
overflowno
spillwayno
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight4.75 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)