Drop In Sink: ALBD6405P-1

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

Center back waste locations, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece, with spillway


Model options

ALBD6405P-1/1, 1 hole, 1 1/2" diameter
ALBD6405P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset
ALBD6405P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right
ALBD6405P-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBD6405P-1

type of basinDouble Compartment
bowl depth5''
bowl finishsatin finished
Bowl front to back16''
Bowl left to right14''
gross weight7.76 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back20 1/2''
Overall left to right31 1/4''
overflowno
spillwayyes
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre back
net weight5.95 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)