Drop In Sink: ALBS6805-1

Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

Left rear waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece.


Model options

ALBS6805-1/1, 1 hole, 1 1/2" diameter
ALBS6805-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset
ALBS6805-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBS6805-1

type of basinSingle Compartment
bowl depth5''
bowl finishsatin finished
Bowl front to back16''
Bowl left to right18''
gross weight3.82 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back20 9/16''
Overall left to right20 1/8''
overflowno
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positionleft back corner
net weight2.69 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)