Drop In Sink: S9106-1

Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.

Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece.

Technical data

Drop In Sink: S9106-1

type of basinSingle Compartment
bowl depth6''
bowl finishsatin finished
Bowl front to back9 1/4''
Bowl left to right11 5/8''
gross weight2.65 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back11 1/4''
Overall left to right13 5/8''
overflowno
tap ledgeno
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight1.28 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)