Drop In Sink: ALBS1305P-1

Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.

Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece.


Model options

ALBS1305P-1/1, 1 hole, 1 1/2" diameter
ALBS1305P-1/2, 2 hole, 1 1/2" diameter, 4" centers
ALBS1305P-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBS1305P-1

type of basinSingle Compartment
bowl depth5''
bowl finishsatin finished
Bowl front to back11''
Bowl left to right13''
gross weight3.37 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
Overall front to back15 7/16''
Overall left to right15 1/8''
overflowno
tap ledgeyes
type of mountinginset mounting
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight2.24 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)