Wash basin: WT600C-7

Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 550x350x145 mm, rectangular shape, 90 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, distance between the centre lines of the fixing holes conform to EN 31, incl. screws and dowels.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.

Optional shroud also available (refer to specification page WT-RS)

Custom hole drilling, specify when ordering, no overflow, accepts 1 1/4" (32mm) waste - not included.


Model options

WT600C-7, Custom (non returnable), specify hole drilling
WT600C-7/1, 1 hole 1 3/8" (35mm)

Technical data

Wash basin: WT600C-7

bowl depth5 3/4''
bowl finishsatin finished
Bowl front to back13 3/8''
bowl shaperectangle
Bowl left to right21 1/4''
gross weight7.00 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness1/16''
Overall front to back18 7/8''
overall height5 7/8''
Overall left to right23 5/8''
overflowno
rear upstandno
surface finishsatin finished
tap ledgeyes
type of mountingwall mounting
waste hole positioncentre back
waste hole projection8 1/4''
waste sizeDN 32
net weight6.80 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)

List of related parts (sorted by type of relation)

accessory

WT-RS, Shroud, stainless steel, 1.20 mm, satin finished, wall mounting, 165x400x267 mm (left to rightxheightxfront to back) READ ALL