Designer/Semi-Public Sink: WHB5222-7

Designer double hand wash basin. 16 gauge 1.8mm thick T304 (CNS 18/10) stainless steel. Exposed surfaces are polished to a #4 satin finish. 1 ¼" (DN 32) waste fitting included with vandal resistant laser cut pyramid waste cover. Basin is installed using wall brackets, no separate carrier is required. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Optional shroud WHB5222-RS
Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. 

Model options

WHB5222-7/2, Two single faucet holes 1 1/2" (38mm) in diameter.
WHB5222-7, Custom (non-returnable), specify hole drilling.

Technical data

Designer/Semi-Public Sink: WHB5222-7

back splash height4''
type of basinDouble Compartment
bowl depth5''
bowl finishsatin finished
Bowl front to back14''
bowl shaperectangle
Bowl left to right48''
gross weight22.06 kg
materialstainless steel
net weight0.00 kg
noise preventionyes
number of bowls1
Overall front to back21 1/2''
overall height12 1/16''
Overall left to right52''
back splashyes
number of faucet holes2
tap hole diameter1 1/2''
tap ledgeyes
type of mountingwall mounting
type of waste kitgrid waste with concealed threaded connection
waste kit includedyes
waste sizeDN 32
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)