Chilled Drinking Fountain: KEMW8EBF-STN

Recessed sports bottle filler chilled drinking fountain combination. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Universal installation, sports bottle filler can be installed either left or right. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Drinking fountain has a vandal resistant push button and a low flow bubbler with flexible guard. Unit will comply with wheelchair accessibility when properly installed. Sports bottle filler has a 0.5gpm (1.9 lpm) flow rate.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, sensor activated bottle filler with bottle counter. Optional filter kit 033926-002.

Technical data

Chilled Drinking Fountain: KEMW8EBF-STN

compressor power0.25 hp
chiller capacity30.00 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.80 ampere
glass filleryes
gross weight35.00 kg
inlet sizeDN 10
materialstainless steel
outlet sizeDN 32
overall height40 3/4''
Overall left to right19 3/4''
type of mountingin-wall installation with box
waste sizeDN 32
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes