Chilled Drinking Fountain: KEPV8ACSL-SBF-STN

Combination chilled split level drinking fountain with sports bottle filler. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Sports bottle filler cabinet finish is brushed stainless steel. Waterways are lead-free in materials and construction. Drinking fountains are mechanically activated. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). Easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, vandal resistant push buttons, no external stream height adjustment, stainless steel. Optional filter kit 033926-001.

Technical data

Chilled Drinking Fountain: KEPV8ACSL-SBF-STN

compressor power0.25 hp
chiller capacity30.40 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.40 ampere
gross weight0.00 kg
inlet diameterDN 10
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
outlet sizeDN 32
Overall front to back18 9/16''
overall height37 13/16''
Overall left to right35 1/4''
total power500.00 watt
type of mountingwall mounting
water temperature10.00 degree celcius
type of operationmanual operation
surface finishsatin finished
motor power500.00 watt
waste sizeDN 32
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes

List of related parts (sorted by type of relation)


035174-001, Disability apron READ ALL


033879-001 READ ALL