Chilled Drinking Fountain: KEP3CP-SND

Free standing chilled drinking fountain. Waterways are lead-free in materials & construction. Stainless steel top with heavy gauge steel frame. High-efficiency cooling tank and coil. Dial-a-drink bubbler.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
3 gph chiller, sandstone finish.

Technical data

Chilled Drinking Fountain: KEP3CP-SND

compressor power0.25 hp
chiller capacity11.40 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.40 ampere
gross weight0.00 kg
inlet diameterDN 10
material thickness1/16''
outlet sizeDN 32
Overall front to back12 5/8''
overall height44''
Overall left to right12 1/8''
surface finishpowder coat galvanized
total power500.00 watt
type of mountingfloor mounting
type of operationmanual operation
water temperature10.00 degree celcius
net weight0.00 kg
CUL Approvalyes

List of related parts (sorted by type of relation)

spare part

030774-006, Spare part - drinking fountains READ ALL

013059-005, Spare part - drinking fountains READ ALL


F037116-101 Galaxi® replacement cartridge READ ALL


033879-001 READ ALL