Chilled Drinking Fountain: KEP8AC-STN

Universal chilled drinking fountain. Waterways are lead-free in materials and construction.  Drinking fountains have built-in 100 micron stainers which stop particles before they enter the waterway. Stainless steel top with a one piece, low flow, tamper proof flexible bubbler. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual activation using anti-microbial push pads.


Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.  

Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 

8 gph chiller, stainless steel. Optional filter kit 033926-001.

Technical data

Chilled Drinking Fountain: KEP8AC-STN

compressor power0.25 hp
chiller capacity30.40 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.40 ampere
gross weight0.00 kg
inlet diameterDN 10
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness1/16''
outlet sizeDN 32
Overall front to back18 9/16''
overall height21 3/16''
Overall left to right18 7/16''
total power500.00 watt
type of mountingwall mounting
type of operationmanual operation
water temperature10.00 degree celcius
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes

List of related parts (sorted by type of relation)

spare part

035607-108, Spare part - drinking fountains READ ALL

accessory

KEPWSBF, Sports Bottle Filler, satin finished, wall mounting, 413x490x163 mm (left to rightxheightxfront to back) READ ALL

consumable

033879-001 READ ALL