Drop In Sink: ALHS4605P-1

Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Wheelchair accessible: meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.
Center waste location. Includes 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

Model Options:
ALHS4605P-1/2L, 1 faucet hole, plus bubbler hole left ledge
ALHS4605P-1/2R, 1 faucet hole, plus bubbler hole right ledge
ALHS4605P-1/2DL, Diagonal punching, 1 faucet hole right ledge plus bubbler hole left ledge
ALHS4605P-1/2DR, Diagonal punching, 1 faucet hole left ledge plus bubbler hole right ledge
ALHS4605P-1/4L, 3 faucet holes 8" centerset, plus bubbler hole on opposing left ledge
ALHS4605P-1/4R, 3 faucet holes 8" centerset, plus bubbler hole on opposing right ledge

Technical data

Drop In Sink: ALHS4605P-1

type of basinClassroom
bowl depth5''
Bowl finishsatin finished
Bowl front to back14''
Bowl left to right16''
gross weight4.70 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade18 gauge (1.2 mm)
Overall front to back16 1/8''
Overall left to right23 1/2''
overflowno
faucet ledgeyes
type of mountingdrop in
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre
net weight3.34 kg
cUPC approvalyes
Wheelchair compliantyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)