Drop In Sink: ALBD4406P-1

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Wheelchair accessible: meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.
Center back waste location. Includes 3 1/2" (89 mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Sink has Spillway® partition.

Model Options:
ALBD4406P-1/1, 1 faucet hole, 1 1/2" diameter, centered over partition.
ALBD4406P-1/3, 3 faucet holes, 1 1/2" diameter, 4" centers, 8" centerset
ALBD4406P-1/4, 4 faucet holes, 3 holes are 8" centerset, with 4th hole 4" to the right.
ALBD4406P-1, Custom (non-returnable)

Technical data

Drop In Sink: ALBD4406P-1

type of basinDouble Compartment
bowl depth6''
Bowl finishsatin finished
Bowl front to back14''
Bowl left to right14''
gross weight8.56 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade18 gauge (1.2 mm)
Overall front to back18 13/16''
Overall left to right31 1/4''
overflowno
spillwayyes
faucet ledgeyes
type of mountingdrop in
type of waste kit3 1/2" crumb cup strainer
undercoatedyes
waste hole positioncentre back
net weight5.84 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)