Drop In Sink: S6810/316P-3

Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2 mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance.  Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners.  Certified to ASME A112.19.3-2008 / CSA B45.4-08.  
Left rear waste location, 1 1/2" (38 mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

Technical data

Drop In Sink: S6810/316P-3

type of basinSingle Compartment
bowl depth10''
Bowl finishsatin finished
Bowl front to back16''
bowl shaperounded rectangle
Bowl left to right18''
gross weight5.81 kg
materialstainless steel
material code1.4404 Chrome-Nickel-Molybdenum steel V4A
material thickness1/16''
material thickness grade18 gauge (1.2 mm)
Overall front to back18 1/8''
overall height10''
Overall left to right20 1/8''
overflowno
rear upstandno
back splashno
surface finishsatin finished
faucet ledgeno
type of mountingcounter top mounting
waste hole positionrear left
waste kit includedyes
waste sizeDN 40
net weight4.45 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)