Remote Chiller: KER5

Galvanized steel cabinet. Chiller is air cooled and is designed for remote installation. Stainless steel storage tank. May be used to supply up to two drinking fountains. 1/4" OD stainless steel water tube connections.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements). R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
5 gph commercial grade chiller.

Technical data

Remote Chiller: KER5

compressor power0.20 hp
chiller capacity19.00 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps3.60 ampere
gross weight0.00 kg
inlet diameterDN 8
outlet sizeDN 8
Overall front to back16 5/8''
overall height16 1/4''
Overall left to right8 1/4''
total power450.00 watt
water temperature10.00 degree celcius
net weight0.00 kg
CUL Approvalyes

List of related parts (sorted by type of relation)

accessory

26929, Installation element READ ALL