Sports Bottle Filler: KEMWSMEBF-STN

Sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Unit will comply with wheelchair accessibility when properly installed. 0.5gpm (1.9 lpm) flow rate.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
Surface mounted, sensor activated bottle filler with bottle counter. Optional filter kit 033926-002.

Technical data

Sports Bottle Filler: KEMWSMEBF-STN

input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
glass filleryes
gross weight12.00 kg
inlet sizeDN 10
materialstainless steel
Overall front to back18 1/4''
overall height40 3/4''
Overall left to right39 1/2''
surface finishsatin finished
type of mountingin-wall installation with box
type of operationsensor operation
waste sizeDN 32
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes