Chilled Sports Bottle Filler: KEMWSM8EBF-STN

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed. 0.5gpm (1.9 lpm) flow rate. Deep alcove to accommodate for larger diameter containers even if they have a small neck.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, surface mount, sensor activated bottle filler with bottle counter. Optional filter kit 033926-002.

Technical data

Chilled Sports Bottle Filler: KEMWSM8EBF-STN

compressor power0.25 hp
chiller capacity30.00 liter per hour
input supply voltage Hz60.00 hertz
input supply voltage V115.00 volt
full load amps4.40 ampere
glass filleryes
gross weight35.00 kg
inlet sizeDN 10
materialstainless steel
motor power550.00 watt
Overall front to back5 5/16''
overall height41 1/4''
Overall left to right20 1/4''
surface finishsatin finished
type of mountingwall mounting
type of operationsensor operation
waste sizeDN 32
net weight0.00 kg
Wheelchair compliantyes
CUL Approvalyes