Wall Hung Basin: AWHB1414P-00

Clinical hand wash basin.  Left waste location with open access to allow for easy cleaning of P-Trap.  Integral 1 1/2" (38 mm) waste welded to bottom of the sink bowl. 18 gauge (1.2 mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.
Wheelchair accessible: meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.
Separate sink carrier is not required. This fixture is coated with SANIGUARD® product protection.SANIGUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms.

Technical data

Wall Hung Basin: AWHB1414P-00

back splash height6''
bowl depth9''
Bowl finishsatin finished
Bowl front to back14 3/8''
Bowl left to right14''
gross weight0.00 kg
materialstainless steel
material code1.4301 Chrome Nickel steel V2A
material thickness grade18 gauge (1.2 mm)
Overall front to back17 9/16''
overall height15 1/16''
Overall left to right14 5/16''
overflowno
back splashyes
surface treatmentSaniguard
type of waste kitintegral tailpiece
undercoatedno
waste hole positionrear left
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)
Wheelchair compliantyes