Urinal: HDU1314-RM

This Heavy Duty Urinal is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm) type 304 (CNS 18/10) stainless steel. The fixture is seamlessly welded and polished to a #4 satin finish. The urinal has an integral flushing rim for sanitary wash down. Includes integral beehive strainer and 1 1/2" (38.1mm) removable P-Trap (concealed within shroud).
The fixture is tested and certified to ASME A112.19.2-2008/CSA B45.1-08 as a Low Consumption Urinal using 1.0 gpf / 3.8 lpf or less.
INSTALLATION:
These fixtures are designed to be installed onto finished walls which are serviceable from a pipe chase. Installation is achieved by threading 4 x 1/2" (13 mm) diameter threaded anchor rods to the back of the fixture. The anchor rods are then secured on the chase side of the wall by means of the supplied nuts and washers. Standard included hardware is for walls up to 8" (203.2 mm) thick. For existing walls, an optional metal cutout template is available. For new block (CMU) or poured concrete walls, an optional wall sleeve is available. rear mounted

Technical data

Urinal: HDU1314-RM

inlet sizeG 3/4 B
materialstainless steel
material thickness1/16''
minimum flushing capacity3.80 liter
outlet sizeDN 40
Overall front to back12 1/2''
overall height27''
Overall left to right14''
surface finishsatin finished
type of flushingwater
type of mountingbolt fix with duct wall
type of urinalsingle urinal
type of waste kitdomed waste
water inletconcealed
gross weight0.00 kg
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)