Security Basin: HDSB1318-RM

This heavy duty security basin is designed for areas requiring the utmost in vandal resistance. The fixture is fabricated from heavy 14 gauge (2.0 mm) type 304 (CNS 18/10) stainless steel. It is seamlessly welded and polished to a #4 satin finish.  Certified to ASME A112.19.3-2008 / CSA B45.4-08.
INSTALLATION: These fixtures are designed to be installed onto finished walls which are serviceable from a pipe chase. Installation is achieved by threading 4 x 1/2" (13 mm) diameter anchor rods to the back of the fixture. The anchor rods are then secured on the chase side of the wall with supplied hardware.  Standard included hardware is for walls up to 8" (203.2 mm) thick. For existing walls, an optional metal cutout template is available. For new block (CMU) or poured concrete walls, an optional wall sleeve is available.
AVAILABLE CONTROLS: Recommended with I-CON electronic (AC or battery powered) basin valves for water savings, enhanced security and performance and reduced maintenance costs. Call Commercial Customer Service for full details. Air operated valves are also available featuring a self closing valve with a non-hold open feature. Flow time is adjustable from  approximately 5 to 60 seconds and has a flow rate of 0.5gpm (1.9 l). The valve is operated by a vandal resistant push button which requires less than 5lbs to operate. The valve can be mounted up to 10 feet (3 meters) away from the push button. Valve conforms to the requirements of ASME A112.18.1-2005/CSA B125.1-05. See basin valve options for available configurations. rear mounted.
Product options:
HDSB1318-RM-I-CON-LAV - with electronic hot and cold valves (recommended)
HDSB1318-RM - SV - Single temperature basin valve
HDSB1318-RM - DV - Dual temperature basin valve

Technical data

Security Basin: HDSB1318-RM

back splash height4''
bowl depth5''
Bowl finishsatin finished
Bowl front to back9 1/2''
Bowl left to right16''
Overall front to back12 1/2''
overall height14 1/2''
Overall left to right18''
overflowno
back splashyes
surface finishsatin finished
type of mountingbolt fix with duct wall
waste sizeDN 40
gross weight0.00 kg
net weight0.00 kg
cUPC approvalyes
Post-consumer-recycled content56%
Pre-consumer recycled content31%
LEED MR credit 4Recycled content (1-2 points)