Universal Drinking Fountains

Universal chilled drinking fountain. Waterways are lead-free in materials and construction. Drinking fountains have built-in 100 micron strainer stops particles before they enter the waterway. Stainless Steel Top. One piece, low flow, flexible tamper proof bubbler. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual activation using anti-microbial push pads.

Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. 

Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 

8 gph chiller, stainless steel. Optional filter kit F036930-001.

Item number

Product name KEP8AC-SND

Product properties

gross weight 29.03 kg
material Steel
net weight 0.00 kg
overall depth (front-back) 18 9/16''
overall height 21 3/16''
overall width (left-right) 18 7/16''
type of mounting wall mounting
Cooling capacity 30.40 liter per hour
Type of operation Manual operation
full load amps 4.40 ampere
material thickness ''
surface finish Sandstone
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
motor power 500.00 watt
total power 500.00 watt
waste size DN 32
outlet size DN 32
inlet diameter DN 10
Bottle filler No
Wheelchair compliant Yes

Consumable

Spare parts

Additional product information


Related products