Sports Bottle Fillers

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed. 0.5gpm (1.9 lpm) flow rate. Deep alcove to accommodate for larger diameter containers even if they have a small neck.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, surface mount, manually activated push button. Optional filter kit F036930-002.

Item number

Product name KEMWSM8SBF-STN

Product properties

gross weight 36.29 kg
material Stainless steel
material code 1.4301 Chrome Nickel steel V2A
net weight 0.00 kg
Overall front to back 5 5/16''
overall height 41 1/4''
Overall left to right 20 1/4''
type of mounting wall mounting
Cooling capacity 30.40 liter per hour
Type of operation Manual operation
full load amps 4.80 ampere
Cabinet finish satin finished
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 550.00 watt
outlet size DN 32
inlet diameter DN 10
Bottle filler Yes

Consumable

Additional product information


Product Pictures
ZPO_001_2000102927-KEMWSM8SBF-STN_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102927-KEMWSM8SBF_#SALL_high.png PNG (301 KB)