Sports Bottle Fillers

Chilled sports bottle filler. Heavy duty steel frame with brushed stainless steel panels. Built-in 100 micron strainer stops particles before they enter the waterway. Unit will comply with wheelchair accessibility when properly installed. 0.5gpm (1.9 lpm) flow rate. Deep alcove to accommodate for larger diameter containers even if they have a small neck.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, surface mount, sensor activated bottle filler with bottle counter. Optional filter kit: F036930-002.

Item number

Product name KEMWSM8EBF-STN

Product properties

gross weight 38.64 kg
material STAINLESS-STEEL
net weight 0.00 kg
overall depth (front-back) 5 5/16''
overall height 41 1/4''
overall width (left-right) 20 1/4''
type of mounting WALL-MOUNTING
Cooling capacity 30.00 liter per hour
Type of operation Sensor operation
full load amps 4.40 ampere
surface finish Brushed stainless steel
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
motor power 550.00 watt
waste size DN 32
inlet size DN 10
Bottle filler Yes
Wheelchair compliant Yes

Consumable

Additional product information