Modular Drinking Fountains

Single chilled stainless steel fountain. Heavy duty galvanized steel wall mounting frame with brushed stainless panels. Waterways are lead-free in materials & construction. Built-in 100 micron strainer stops particles before they enter the waterway. Free flow bubbler. Unit will comply with wheelchair accessibility when properly installed. Installation instructions included.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, with mechanical push button. Optional filter kit: F036930-002.



Item number

Product name KEM8SBPM-STN

Product properties

gross weight 51.71 kg
material Stainless steel
material code 1.4301 Chrome Nickel steel V2A
net weight 0.00 kg
Overall front to back 19 9/16''
overall height 40 13/16''
Overall left to right 19 3/4''
type of mounting wall mounting
Cooling capacity 30.40 liter per hour
Type of operation Manual operation
full load amps 4.80 ampere
Cabinet finish satin finished
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 550.00 watt
outlet size DN 32
inlet diameter DN 10
Bottle filler No

Consumable

Additional product information


Product Pictures
ZPO_001_2000102941-KEM8SBPM-STN_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102941-KEM8SBPM_#SALL_high.png PNG (301 KB)