Modular Drinking Fountains

Split level stainless steel bowl fountain chilled . Heavy duty galvanized steel wall mounting frame with brushed stainless panels. Waterways are lead-free in materials & construction. Built-in 100 micron strainer stops particles before they enter the waterway. Tamper proof flexible bubbler. Mechanical push button. Unit will comply with wheelchair accessibility when properly installed. Installation instructions included.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller. Optional filter kit: F036930-002.

Item number

Product name KEM8CR-STN

Product properties

gross weight 75.45 kg
material STAINLESS-STEEL
material code 1.4301 Chrome Nickel steel V2A
net weight 0.00 kg
overall depth (front-back) 18 1/4''
overall height 40 3/4''
overall width (left-right) 39 1/2''
type of mounting WALL-MOUNTING
Cooling capacity 30.40 liter per hour
Type of operation MANUAL-OPERATION
full load amps 4.80 ampere
surface finish Brushed stainless steel
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 550.00 watt
outlet size DN 32
inlet diameter DN 10
Bottle filler No
Wheelchair compliant Yes

Consumable

Spare parts

Additional product information


Related products