Combinations

Combination chilled split level drinking fountain with sports bottle filler. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Sports bottle filler cabinet finish is brushed stainless steel. Waterways are lead-free in materials and construction. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Unit will comply with wheelchair accessibility when properly installed. Manual drinking fountain activation using anti-microbial push pads.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. 
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 
8 gph chiller, stainless steel. Optional filter kit F036930-001.

Item number

Product name KEP8ACSL-SBF-STN

Product properties

gross weight 47.17 kg
material Stainless steel
material code 1.4301 Chrome Nickel steel V2A
net weight 0.00 kg
overall depth (front-back) 18 9/16''
overall height 37 13/16''
overall width (left-right) 36 1/8''
type of mounting wall mounting
Cooling capacity 30.40 liter per hour
Type of operation Manual operation
full load amps 4.40 ampere
surface finish satin finished
water temperature 10.00 degree celcius
compressor power 0.25 hp
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
total power 500.00 watt
waste size DN 32
outlet size DN 32
inlet diameter DN 10
Bottle filler Yes
Wheelchair compliant Yes

Consumable

Additional product information