Combinations

Combination chilled drinking fountain with sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Moulded components utilize a silver-based antimicrobial compound that reduces the growth of micro-organisims and mildew to protect surfaces from discolouration, odours, and degradation. Included tailpiece is sized to accept either 1 1/2 inch (38 mm) or 1 1/4 inch (32 mm) P-trap (not included).
Unit will comply with wheelchair accessibility when properly installed. Manual fountain activation using anti-microbial push pads.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant. 
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards. 
8 gph chiller, stainless steel. Optional filter kit F036930-001.

Item number

Product name KEP8AC-SBF-STN

Product properties

gross weight 33.57 kg
material Stainless steel
material code 1.4301 Chrome Nickel steel V2A
net weight 0.00 kg
Overall front to back 18 9/16''
overall height 37 13/16''
Overall left to right 18 7/16''
type of mounting wall mounting
Type of operation Manual operation
input supply voltage Hz 60.00 hertz
input supply voltage V 115.00 volt
motor power 500.00 watt
total power 500.00 watt
outlet size DN 32
inlet diameter DN 10
Bottle filler Yes

Additional product information


Product Pictures
ZPO_001_2000102862-KEP8AC-SBF-STN_nd1000-1x1.png PNG (977 KB)
Technical Drawing Marketing
ZTE_001_2000102862-KEP8AC-SBF-STN_#SALL_high.png PNG (301 KB)
Mounting Instruction
ZMI_001_2000102863-KEPAC-SBF-Installation_EN_#SALL_#AQU_#V1.pdf PDF (2.6 MB)