KEP8AC-EBF-SND Universal chilled combination, electronic

Combination chilled drinking fountain with sports bottle filler. Sports bottle filler cabinet finish is brushed stainless steel. Deep alcove to accommodate for larger diameter containers even if they have a small neck. Waterways are lead-free in materials and construction. Surface mount frame assembly. Units have built-in 100 micron strainer stops particles before they enter the waterway. One piece stainless steel top. Low flow bubbler with flexible guard. Heavy duty galvanized steel frame. Moulded components utilize a silver-based antimicrobial compound that reduces the growth of micro-organisims and mildew to protect surfaces from discolouration, odours, and degradation. Unit will comply with wheelchair accessibility when properly installed. Manual drinking fountain activation using anti-microbial push pads.
Compressor is hermetically sealed, reciprocating type, single phase, lifetime lubrication. The condenser is cooled with a permanently lubricated fan motor. Stainless steel cooling tank with continuous copper tubing. Factory preset thermostat, (adjustable to compensate for altitude requirements) easily accessible by removal of front panel. R134a refrigerant.
Product Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953). Models covered by this specification comply with all known Plumbing Codes. Listed by Underwriters’ Laboratories to U.S. and Canadian standards.
8 gph chiller, sandstone finish cabinet, sensor activated sports bottle filler with bottle counter. Optional consumable: Galaxi Filtration Kit for KEP universal series. Optional Galaxi Filter Cartridge: F037116-001.

18 9/16 x 18 7/16 x 37 13/16" Overall (FB x LR x H).
472 x 469 x 960 mm Overall (FB x LR x H).

Item number

Product name KEP8AC-EBF-SND

Product properties

Overall depth 18 9/16 "
Overall height 37 13/16 "
Overall width 18 7/16 "
Type of mounting Wall mounting
Cooling capacity 30.00000 liter per hour
Type of operation Sensor operation
Surface finish Powder coat galvanized
Input supply voltage Hz 60.00000 hertz
Input supply voltage V 115.00000 volt
Motor power 500.00000 watt
Waste size DN 32
Inlet size DN-10-3-8INH
Drinking bubbler Yes

Additional product information


Optional Parts

Consumable

Related products

KEP8AC-EBF-SND Universal chilled combination, electronic
KEP8AC-EBF-SND Universal chilled combination, electronic Single Combination - Chilled

KEP8AC-EBF-SND Universal chilled combination, electronic

Overall width:
18 7/16 " 
Overall height:
37 13/16 " 
Overall depth:
18 9/16 " 
KEPVAC-SBF-STN Universal unchilled combination, manual
KEPVAC-SBF-STN Universal unchilled combination, manual Single Combination - Unchilled

KEPVAC-SBF-STN Universal unchilled combination, manual

Overall width:
17 5/8 " 
Overall height:
37 13/16 " 
Overall depth:
18 9/16 "